DPMS GII

DPMS GII.

DESIGNED II DOMINATE.


THE FUTURE OF THE MSR HAS BEEN REDEFINED. DPMS GII IS HERE.

INTRODUCING THE DPMS GII

THE LIGHTEST, MOST RELIABLE, TECHNICALLY ADVANCED .308 MSR.

DESIGNED II DOMINATE.


DPMS GII

Features

Features 1

1
Forged upper receiver with standard MSR forward assist and improved shell deflector
2
Standard M4 dimensions
3
Reduced overall height, length & weight

Features 2

4
Standard MSR fire control and take down components. Improved hammer & trigger pins
5
Forged lower receiver with integral enhanced triggerguard

Features 3

6
Bevelled mag well

Features 4

7
Enlarged ejection port
8
Standard MSR dimensions from bore to gas tube, and bore to rail, allow for increased .223 handguard compatability and addition of sights or optics
9
Steel feed ramp

Monolithic bolt carrier

Bolt Cutter 1

1
Forged upper receiver with standard MSR forward assist and improved shell deflector
2
Forged upper receiver with standard MSR forward assist and improved shell deflector
3
Reduced overall length & weight

New extractor material

New extractor material

New extractor and elastomer extractor spring provide outstanding functional, endurance, and environmental resistance improvements.

Dual ejector system

Dual ejector system

Reduces the ejector spring fatigue. Through duplicity, the likelihood of a failed ejection is significantly reduced.

GII

+ Reliability
+ Lightweight
+ Improved Handling
+ Increased Durability
+ Longevity
+ Versatility
+ Adaptability

Unfailing
Reliability.

Revolutionary improvements make the GII the most reliable, longest lasting MSR platform on the market. Key to this are: an all new elastomer extractor spring, new extractor material, dual ejectors, and a steel insert feed ramp. These components fundamentally change the way the conventional MSR functions.


The result:
the most consistent, efficient, and reliable Extraction and ejection pattern of any MSR.

The biggest revolution to the GII might just be the smallest.


Improved extractor & elastomer Extractor spring

Through countless hours of research, testing, and tens of thousands of fired rounds, DPMS has selected a new extractor material that is nearly impervious to breaking, and a patent pending elastomer extractor spring. We ran tens of thousands of rounds through during testing without fatigue, breakage, failure, and the new materials resisted temperatures from -60˚F to 650˚F+ as well as every gun cleaner, solvent, oil or degreaser we could get our hands on.

Dual Ejectors

The dual ejector system reduces the ejector spring fatigue. Through duplicity, the likelihood of a failed ejection is significantly reduced.

Steel feed ramp

GII incorporates an inserted steel feed ramp, allowing a lighter, smaller barrel extension and receiver, while improving feeding of more ammunition types.

Enlarged ejection port

Lengthened port allows for better, more consistent ejection.

Smaller. Lighter.
Stronger.

The rifle simply feels better when you pick it up.

The heart of the GII is a matched pair of forged, level III anodized, Teflon* coated 7075 receivers, providing improved strength and durability. With the advancements in the forging, feed ramps and bolt geometry, the GII has a shorter overall receiver length, as well as a reduced receiver diameter.


Forged upper & lower receivers

Forged upper and lower receivers are contoured to be more ergonomic. Compact design is both lightweight and only 1/2” longer than a 5.56 MSR receiver, 5/8” shorter than the current LR-308.

Lower receiver incorporates integral trigger guard and accepts any standard MSR pistol grip.

Reduced weight, yet lighter recoil

Reduced mass carrier provides smoother, softer recoil impulse than the GEN1 .308.

Reduced mass, forged, monolithic bolt carrierwith forward assist

New lightweight, forged, monolithic bolt carrier utilizes an integral gas key tower and removable gas key extension.

Beveled mag well

The beveled mag well provides a comfortable grip for those that prefer a mag well hold and also aids in quicker mag changes.

Improved bolt & barrel extension

An all new bolt geometry provides superior lockup and strength. The bolt geometry allows a smaller diameter barrel extension to be used, in turn allowing upper receiver to be smaller, reducing overall material and weight without compromising strength.

*Teflon is a registered trademark of DuPont.
Picture taken with a remote camera.

Adaptable.
Versatile.

All the accuracy you’d expect from DPMS.

With its adaptability in accepting standard MSR fire control and more .223 two piece handguards than before, the GII core also remains versatile in both tactical and hunting configurations. A true game-changer.


Increased .223 platform handguard adaptability

Accepts more 2 piece MSR handguards than previous LR-308. Newly designed barrel nut allows the use of .223 diameter free float handguard systems.

Accepts standard MSR fire controls

DPMS GII rifles accept standard MSR fire controls for even more adaptability.

An exceptional tactical rifle

Contoured steel feed ramps, revolutionary redesigned extraction system, and a dual ejector design decrease feeding, extraction and ejection malfunctions.

Completely re-designed gas delivery system utilizes a monolithic bolt carrier and optimized gas ring clearances to eliminate the possibility of gas leakage during operation.

GII CONFIGURATIONS 2014

Designed II Dominate

Select your rifle

Select your rifle

16” LIGHTWEIGHT CARBINE

GII AP4

Lighter, stronger,
and even more badass.

DPMS GII AP4


Description

The 16” GII AP4 is everything you would expect from an improvement to the award winning LRAP4, which was the second MSR to win an NRA Golden Bullseye Award. Which MSR was the first you ask? None other than the DPMS 24” LR308. Lightweight 16” barrel, AP4 Stock, DPMS carbine length Glacier Guard and MagPul® Gen 2 rear sight.

RFLR-G2AP4
$1499

Specifications

CALIBER: 308 / 7.62 Nato

LENGTH: 34.25" (Collapsed)

WEIGHT: 7.25lbs

BARREL: 16" Lightweight 4150 Chromelined

UPPER RECEIVER: Forged 7075 T6 lvl 3 Anodized, Teflon coated, A3 type

LOWER RECEIVER: Forged 7075 T6 lvl Anodized, Teflon coated

TWIST: 1x10

STOCK: M4 6 Position collapsible

FIRE CONTROL: Std AR

PISTOL GRIP: A2

FRONT / REAR SIGHT: F marked Front sight base, MagPul® BUIS

FLASH HIDER: Cancellation Brake

HANDGUARD: Glacier Guard

16” RECON CARBINE

GII RECON

LIGHTER THAN THE ORIGINAL. EVEN MORE BATTLE READY.

DPMS GII RECON


Description

The 16” GII Recon is just as battle ready as the original .308 Recon, but weighing less means, you can run it at your next high round count carbine course without needing to bulk up your upper body first. 16” stainless steel bead blasted barrel, DPMS hunter gas block, 4 rail free-float tube, and MagPul® MOE pistol grip and stock.

RFLR-G2REC
$1759

Specifications

CALIBER: 308 / 7.62 Nato

LENGTH: 38”

WEIGHT: 8.5lbs

BARREL: 16" 416 Stainless, Bead Blasted - Mid length Gas

UPPER RECEIVER: Forged 7075 T6 lvl 3 Anodized, Teflon coated, A3 type

LOWER RECEIVER: Forged 7075 T6 lvl Anodized, Teflon coated

TWIST: 1x10

STOCK: MagPul® MOE 6 Position Collapsible Stock

FIRE CONTROL: DPMS 2 Stage

PISTOL GRIP: MagPul® MOE

FRONT / REAR SIGHT: MagPul® Front and Rear BUIS

FLASH HIDER: None - Advanced Armament 51T Blackout Silencer Adapter

HANDGUARD: DPMS 4 Rail Free Float Tube

18” SASS RIFLE

GII SASS

Used by swat across
the U.S., Ready for you!

DPMS GII SASS


Description

The 18” GII SASS. The original SASS is used in many Law Enforcement agencies and SWAT teams across the country, and was the gun used by the winning sniper in the 2012 CAN AM Police games. You take that tried and true performance and you throw it into a more versatile and lighter sniper platform, and you get a match made in long range heaven. A 30% weight reduction, 18” fluted stainless barrel, 4 rail free float tube, Harris Bi-Pod and adapter, MagPul® PRS stock and Gen 2 MBUS.

RFLR-G2SASS
$2379

Specifications

CALIBER: 308 / 7.62 Nato

LENGTH: 39”

WEIGHT: 10.5lbs

BARREL: 18" 416 Stainless, Teflon coated, Fluted Bull Barrel, Mid Length Gas

UPPER RECEIVER: Forged 7075 T6 lvl 3 Anodized, Teflon coated, A3 type

LOWER RECEIVER: Forged 7075 T6 lvl Anodized, Teflon coated

TWIST: 1x10

STOCK: MagPul® PRS Rifle Stock

FIRE CONTROL: DPMS 2 Stage

PISTOL GRIP: Panther Tactical Grip

FRONT / REAR SIGHT: MagPul® Front and Rear BUIS

FLASH HIDER: None - Panther Flash Hider

HANDGUARD: DPMS 4 Rail Free Float Tube

20” LIGHTWEIGHT HUNTER

GII HUNTER

Deadly accurate.
The true hunter.

DPMS GII Hunter


Description

The 20” GII .308 Hunter is exactly that, a hunter! This gun is deadly accurate, loaded with features and benefits, but light enough to carry all day in the woods, plains, snow or desert. 20” target crown lightweight stainless steel barrel, enhanced carbon fiber free float tube, hogue grip, and MagPul® MOE RIfle stock.

RFLR-G2308L
$1699

Specifications

CALIBER: 308 / 7.62 Nato

LENGTH: 39”

WEIGHT: 7.76lbs

BARREL: 20" 416 Stainless, Teflon coated

UPPER RECEIVER: Forged 7075 T6 lvl 3 Anodized, Teflon coated, A3 type

LOWER RECEIVER: Forged 7075 T6 lvl Anodized, Teflon coated

TWIST: 1x10

STOCK: MagPul® MOE Rifle Stock

FIRE CONTROL: DPMS 2 Stage

PISTOL GRIP: Hogue

FRONT / REAR SIGHT: NA

FLASH HIDER: None - Target Crown

HANDGUARD: DPMS Carbon Fiber Free Float Tube

24” Bull

GII BULL

Lighter, stronger but as accurate as the original.

DPMS GII Bull


Description

The 24” GII BULL is every bit as accurate as the original award winning bench rest shooter, but in a 20% lighter package. The diehard long range DPMS fans now have the next generation to show off at the range. 24” stainless steel bull barrel, standard length free float tube, and A2 Mil Spec buttstock.

RFLR-G2B24
$1759

Specifications

CALIBER: 308 / 7.62 Nato

LENGTH: 43”

WEIGHT: 10lbs

BARREL: 24" 416 Stainless Bull

UPPER RECEIVER: Forged 7075 T6 lvl 3 Anodized, Teflon coated, A3 type

LOWER RECEIVER: Forged 7075 T6 lvl Anodized, Teflon coated

TWIST: 1x10

STOCK: A2

FIRE CONTROL: Std AR

PISTOL GRIP: A2

FRONT / REAR SIGHT: NA

FLASH HIDER: None - Target Crown

HANDGUARD: DPMS Aluminum Free Float

16” LIGHTWEIGHT MOE CARBINE

GII MOE

Light, Carbine,
Heavy Attitude.

DPMS GII MOE


Description

The GII MOE Carbine is for the .308 shooter who wants certain enhancements. This rifle, along with the AP4, is the lightest model GII rifle, coming in at 7.25 lbs. Add in the complete MOE furniture kit and you have one badass enhanced carbine that will turn heads at the range.

RFLR-G2MOE
$1599

Specifications

CALIBER: 308 / 7.62 Nato

LENGTH: 34.25" (Collapsed)

WEIGHT: 7.25lbs

BARREL: 16" Lightweight 4150 Chromelined

UPPER RECEIVER: Forged 7075 T6 lvl 3 Anodized, Teflon coated, A3 type

LOWER RECEIVER: Forged 7075 T6 lvl Anodized, Teflon coated

TWIST: 1x10

STOCK: MOE Carbine Stock, Commercial Spec

FIRE CONTROL: Std AR

PISTOL GRIP: Magpul MOE

FRONT / REAR SIGHT: F marked Front sight base, MagPul® BUIS

FLASH HIDER: Cancellation Brake

HANDGUARD: MOE Carbine-Length AR15/M16

Acquire


DPMS GII

Ask your dealer to order one for you today.

Prices for DPMS GII rifles 2014
RFLR-G2AP4
$1499
RFLR-G2REC
$1759
RFLR-G2SASS
$2379
RFLR-G2308L
$1699
RFLR-G2B24
$1759
RFLR-G2MOE
$1599
Online GII catalog

DPMS GII is currently available at select locations. Contact your dealer for availability. Use our Dealer Locator to find a DPMS Dealer near you.

You need to be a DPMS Licensed Dealer of have a current FFL on file with DPMS to order this product.

DPMS GII

DPMS GII.

Watch the video


DESIGNED II DOMINATE.